20kN 50kN 100kN Celtron Load Cell Tensile Test Equipment With
Computer Control
HD-B604B-S Universal Test Machine.pdf
Applications & Functions
WDW series are suitable for tensile, compression, bending test of
rubber, plastic, electrical wire and cable, composite, plastic
profiled bar, waterproof roll, etc. They may add test methods or
rules according to customers requirement. They are essential
testing instrument for quality testing section, university and
college, research institution and industrial and mining enterprise.
Main Features
Universal Tensile Strength Tester equips alternating servomotor for
driving crosshead and imported photoelectric encoder for
displacement measure. This machine is accompanied with the digital
multi-channel closed loop control system, which apply with the
latest measurement and control systems with lots of advanced
professional and technical development. Control software can
automatically finger out routine data, such as tensile modulus of
elasticity, extend rate after rupture, non-proportional extend
strength RP0.2, etc. It can realize three close loops control and
real time display many testing curves of force-displacement,
force-time, and stress-strain. These curves automatically switch.
Testing process control and data processing conform to the
requirements of GB.ISO and so on. This machine has the following
performances: Auto zero, auto gear shifting or no subsection, auto
indication, auto save, uni-control or multi-step programmed
control, auto stop, auto analysis or assistant manual analysis,
batch test, testing result statistic, curve select and over load
protection. And the machine is beautiful, multifunctional, and
operates easily and reliably.
Standards
ASTM A730, ASTM E4, ASTM E9, ISO6892, ISO7438, ISO75000-1, EN
10002-4, GB/T228-2002, etc.
Technical Parameters :
Capacity (optional) | 5,10,20,25,50,100,200kg(optional) |
Unit (Switchable) | G, KG, N, LB |
Load Resolution | 1/250,000 |
Load Accuracy | < ± 0.5% |
Stroke (include the grips) | 1000mm |
Test speed | 0.1~500mm/min selectable |
Weight (exclude the grips) | 190 Kg |
Operation Mode | PC or LCD |
Display | PC or LCD |
Motor | Servo Motor |
Dimension(W×D×H)-Main Unit | 570×510×1240mm |
Driver | High precise ball screw |
Power | single phase, 220V/ 10A or designated |
Accessories | Tensile grips 1 set, one computer |
Quality Control
A) Quality assurance items
The guarantee period with FOC within one year (not including
nonexpendable & transport and travel fees)
During the guarantee period, Haida shall supply free maintenance or
replacement for the damaged part(just for nonexpendable part)
induced by non-human damage;
If any quality problems occurs within the guarantee period, and
Haida must provide on-site service, the transport and travel
expense shall be borne by customer;
If any big quality problems occurs out of the guarantee period,
Haida will provide a maintain service, the transport and travel
expense shall be borne by customer, also charge for a favorable
price;
Haida will provide a lifetime favorable price to the buyer with the
materials and spare parts used in system operation, equipment
maintenance;
B) The main quality warranty maintenance certificate
If there is any dispute please refer to our guarantee letter, so:
1. please keep the guarantee letter, if you lost it, please connect
with us in a month.
2. If the guarantee letter has been altered or it has no our stamp,
it is useless.
C) The following conditions need to be paid reasonably even in the
assurance period:
1. Natural reasons
2. Operating mistakes
3. Voltage is not fit for our operation instruction
4. Repack it without our guides
5. Damaged for borrowing to others
6. Damaged for authorized machine modification
7. Damaged for authorized calibration
8. Authorized transshipment mistake
9. Serve for long distance area
D) Attentions
1. Any service outside Guangdong, China, transport and travel fees
shall be paid by customer.
2. The apparatus try not to be used in the following situations:
a. Vibration, rocking the occasion.
b. Direct sunlight.
c. Hot, dusty, damp places.
d. To ensure safe, AC supply of the machine should be well
grounded.
e. Do not use strong solvents (such as: benzene, nitro oil) washing
machine.
f. Do not inject water and debris into the machine; prevent damage
to electrical components and electrical shock.
g. Instrument displays the disassembly and debugging can only be
measured by the State Department approved the units and the
company, other people not allowed to overhaul.
