Composite Adhesion Testing Equipment Universal Tensile Testing
Machine
Universal Test Machine.pdf
STANDARD FEATURES
| Item | Description |
| Frame capacity | 5000kg |
| Load cell brand | Germany brand load cell for high accuracy
5000kg (1000,2000kg are optional) |
| Load accuracy | 0.5% F.S |
| Control system | PC with windows 7 system |
| Motor | Panasonic servo motor w/AC variable speed drive system,
high-precision mechanical ball screw rod |
| Force reading | kgf, Ibf, N, KN, T etc |
| Vertical test space | 1100mm including fixture |
| Horizontal test space | ≤400mm |
| Test speed | 0.1~300mm/min (adjustable) |
| Software | TM 2101 |
| Curves display | Load- elongation, Elongation-time, Time-elongation, Stress-strain |
| Data display | Max. force, speed, sample information, strength(Kpa, Mpa, N/mm,
N/mm2) etc… |
| Safety features | E-Stop
Over-load protection
Upper and lower limit switches
Load sensor with automatic retreat |
APPLICATIONS
1. Tested sample: laminated materials, wood, leather, rubber &
plastic, metal material, etc.
2. Different test with different grips: tensile, peel, tear, heat
seal, adhesive, bend and open force.
3. Deformation under defined load: Test deformation under defined
load of tested sample
4. Load under defined deformation: Test load under defined
deformation of tested sample
5. Software can issue word/excel report with results for max.
force, elongation, tensile strength,
peel strength, tear strength, compression strength, etc.
SOFTWARE – TM 2101
HAIDA TEST EQUIPMENT TEST STANDARDS FOR SHARING
Adhesives Tape/Pressure Sensitive Tape
Ø EN 1719: Loop Tack Test
Ø ASTM D3654: Shear Adhesion Test
Ø ASTM D3759: Tensile &Elongation Test
Ø FTM: 180&90 Degree Peel Test, Loop Tack
Ø EN 1939, ASTM D3330: 180&90 Degree Peel Test
Ø ISO 11339, ASTM D1876, ASTM F2256: T-type Peel Test
Adhesive
Ø ASTM D903: Peel & Stripping Test
Ø ASTM D1002: Shear Strength (Adhesive for metal to metal)
Ø ISO 4587: Tensile lap-shear strength (Rigid-to-rigid bonded
assemblies)
Film/Plastic Film
Ø ASTM D882: Tensile Test
Ø ASTM F1306: Puncture Test
Ø ASTM D1938: Trouser Tear Test
Ø ASTM D2732: Thermal Shrinkage Test
Ø ASTM D1709, ISO 7765-1: Free-Falling Dart Method
Ø ASTM D1894: Static and Kinetic Coefficients of Friction
Ø ASTM D1424, ASTM D1922, ISO 1974: Elmendorf Tearing Strength Test
Plastic& Plastic Pipe
Ø ISO 180: Izod Impact Test
Ø ISO 9966: Ring Stiffness Test
Ø ISO 179: Charpy Impact Test
Ø ISO 4892: Weathering Aging Test
Ø ASTM D3163: Plastic Lap-Shear Test
Ø ISO 4422, ISO 3127: Pipe Impact Test
Ø ASTM D4565, ISO 11357, EN 728: DSC/OIT
Ø ISO 75: Heat Deflection Temperature (HDT)
Ø ASTM D1598: Hydrostatic Pressure and Burst Test
Ø ISO 1133, ASTM D1238: Melt Flow Rate Test (MFR/MVR)
Ø ASTM D790, ISO 178, ISO 14125, ASTM D6272: Bend Test
Ø ISO 306, ASTM D1525: Vicat Softening Temperature (VST)
Ø ASTM D882, ASTM D 638, ISO 527, ASTM D1708: Tensile Test
Rubber
Ø ASTM D412, ISO 37-2005, JIS K6251, DIN 53504-2009: Tensile
Strength & Elongation Test
Ø ASTM D1149-07, ASTM D1171-99, ISO 7326, ISO1431-1, DIN 53509-1:
Ozone Aging Test
Ø ASTM D624-00, ISO 34-1: Tearing strength Test
Ø ASTM D395-03, ISO 815-1: Compression Set Test
Ø ASTM D2240-05, ISO 7619-1, JIS K6253, ISO 868: Shore Hardness
Type A/D
Ø ASTM D573, ASTM D865, ISO188 Method B, DIN 53508 High/ Low
Temperature Test
Ø ISO 2781(Method A): Density Test
Ø ASTM D5289-95/ ISO6502: No-Rotor Rheometer/Curemeter
Foam
Ø ASTM D3574 Test E, ASTM D1623, ISO 1798: Tensile Test
Ø ASTM D3574 Test F, ISO 8067: Tear Test
Ø ASTM D3574 Test A: Density Test
Ø ASTM D3574 Test B1, ISO 2439: IFD Test
Ø ASTM D3574 Test H: Resilience (Ball Rebound) Test
Ø ASTM D3574 Test I3: Dynamic Fatigue Test by Constant Force
Metal
Ø ASTM E8, EN 10002-1,ASTM A370: Tensile Test
Ø ASTM A370: Bend Test
Ø ASTM B-117, ISO 3768: Salt Spray Test
Ø ISO 6508: Rockwell Hardness Test
Ø ISO 6507: Vickers Hardness Test
Ø ISO 6506, ASTM E10-14: Brinell Hardness
Ø ASTM E23, ISO 148: Impact Test
